Ключевые слова: LTS, Nb, plates, grain size, RRR parameter, thermal conductivity, tensile tests, mechanical properties, dislocations, strain effects, resistivity, experimental results, modeling
Kim K.M., Dixon I.R., Walsh R.P., Lu J., Bai H., Wright A., Voran A.J., Marshall W.S., Bosque E., Buchholz K.
Ключевые слова: HTS, YBCO, tapes, coils pancake, joints, solder, fabrication, joint resistances, test results
Osamura K., Nishijima G., Zhang Y., Chiesa L., Zhao Y., Shin H.S., Nijhuis A., Weiss K., Walsh R.P., Zhao Z., McRae D.M., Bagrets N., Anvar V.A., Delgado M.A.
Mitchell N., Libeyre P., Martovetsky N., Walsh R.P., Jong C., Lyraud C., Dolgetta N., Hatfield D., Smith J., Sgobba S., Evans D., McRae D.M., Reiersen W., Freudenberg K., Everitt D., Cormany C., Langeslag S., Gaxiola E., Journeaux J., Pearce R., Aviles I., Chae T., Hughes D., Reagan T., Litherl S.
Ключевые слова: ITER, central coils, fabrication, LTS, Nb3Sn, design parameters, winding configurations, joints, cryogenic systems
Ключевые слова: REBCO, coated conductors, contact characteristics, resistance, pressure dependence, loads, thermal performance, cycling, surface, coatings, YBCO, GdBCO, surface oxidation, thermal performance
Godeke A., Markiewicz W.D., Walsh R.P., Jaroszynski J., Bird M.D., Viouchkov Y.L., Noyes P.D., Marks E.L., McRae D.M., Abraimov D.V., Marshall W.S., White J.M., Francis A., Arroyo E., Barret N., Kurteva D.V., Pereira R.C.
Larbalestier D.C., Otto A., Kim Y., Hellstrom E.E., Jiang J., Trociewitz U., Walsh R.P., McRae D., Bosque E., Brown M.
Ключевые слова: HTS, Bi2212, wires, tensile tests, stress effects, strain effects, stress distribution, reinforcement, measurement setup, modeling, experimental results
Ключевые слова: MRI magnets, HTS, YBCO, coated conductors, screening current, gradient, coils, test results, portable unit
Ключевые слова: HTS, NMR magnet, flux pumps, stability, cryogenic systems, cryocoolers, Bi2223/Ag, control systems
Ключевые слова: HTS, REBCO, coated conductors, coils insert, hybrid systems, magnets, termination, design, test results, critical caracteristics, critical current, cycling
Jewell M.C., Hamada K., Vostner A., Devred A., Weiss K.-P., Boutboul T., Bessette D., Jung A., Pong I., Yu W., Liu S., Sgobba S., Park S.-H., Tronza V., Walsh R.P.*10
Ключевые слова: ITER, LTS, cable-in-conduit conductor, measurement setup, mechanical properties, jacket, fatigue behavior, stress effects
Jewell M.C., Larbalestier D.C., Devred A., Walsh R.P., Lee P.J., Starch W.L., Sheth M.K., McRae D.M., Sanabria C.M.
Weijers H.W., Larbalestier D.C., Gavrilin A.V., Markiewicz W.D., Walsh R.P., Jaroszynski J., Pickard K.W., Noyes P.D., Voran A.J., Sheppard W.R., Aixia X., Jun L.
Ключевые слова: magnets, hybrid systems, LTS, NbTi, Nb3Sn, coils insert, HTS, REBCO, coated conductors, coils pancake, test results, quench protection, design parameters, design
Ключевые слова: LTS, Nb3Sn, composites, wires, HTS, YBCO, coated conductors, mechanical properties, stabilizing layers, surface, stress effects, strain effects, microstructure, experimental results
Weijers H.W., Chen J., Painter T.A., Bole S., Dixon I.R., Bird M.D., Han K., Lu J., Walsh R., Zhai Y., Adkins T., Xu T., Cantrell K., Hongyu B., Smeibidl P., Ehmler H.*2 Gavrilin A.
Ключевые слова: magnets, hybrid systems, cable-in-conduit conductor, LTS, Nb3Sn, cryostat, cryogenic systems, series connection
Osamura K., Hojo M., Seeber B., Nyilas A., Ilyin Y., Katagiri K., Clickner C., Shin H., Nijhuis A., Ekin J., Thoener M., Fluekiger R., Walsh R.P., Toplosky V., Ochiai S.*10, Kubo Y.*11
Ключевые слова: LTS, Nb3Sn, wires, mechanical properties, cables, comparison, review, power equipment
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.